中国在线翻译网翻译文库
字体大小: 大 中 小
|
Model 1128 Zincate Zinc-Plating Brightener
|
提交者:
小珰珰
||
提交日期:2019/2/21 15:11:00
文体属类:产品说明 ||性质:
共享
|| 方向:
英译中
|| 来源:
原创
||
阅读:2410次
|
|
摘要:This brightener is our latest fruit with independent intelligent right after the development of ZD-93. Its excellent performance ensures its position on current market as a distinctive high-end zincate zinc-plating brightener. |
|
[中文]1128型锌酸盐镀锌光亮剂
本品是我厂继ZD-93之后又一具有自主品牌的最新成果,产品各项性能优良,是目前市场上较有特色的高档锌酸盐镀锌光亮剂
一、特点
1、 单一添加、操作简单
2、 镀液稳定,对杂质有一定的容忍度。
3、 结晶细致,镀层柔软,走位佳。
4、 工艺范围,光亮度及整平性尤为突出。
二、工艺条件 最佳
zno 9-15g/l 10 g/l
NaOH 90-120 g/l 100 g/l
ZD-969去杂剂 6-8 g/l 8 g/l
1128光亮剂 5-7 ml/l(开缸量) 6ml/l
温度 10-50℃
DK 2-5A/dm2
SK:SA 1:1.5-2
光亮剂消耗量:80-120ml/KAH
二、 注意事项:
1、新配槽时,可选用我厂生产的ZD-969去杂剂,不用电解处理即可生产,少量添加可明显缩短电解时间,亦可不用ZD-969去杂剂,但须电解彻底,日常镀液维护,可用969去杂剂1-4g/l,具有明显净化镀液的功能。
2、实际生产中,光亮剂要勤加少加,特别注意勿长期过量添加。以免引起镀层质量下降。
3、常温生产时,镀液内注意保持5-6ml/l光亮剂,到高温时要增至7-8ml/l。随着镀液温度升高,电流量相应增大,光亮剂消耗量亦增大。
4、镀液日常维护与管理,镀液的故障处理,参照一般技术要求。
[/中文]
[外文]Model 1128 Zincate Zinc-Plating Brightener
This brightener is our latest fruit with independent intelligent right after the development of ZD-93. Its excellent performance ensures its position on current market as a distinctive high-end zincate zinc-plating brightener.
I. Features:
1.Easy to operate. Single to use.
2. The bath is stable and has high tolerance to impurities.
3. Of fine crystallizing, soft plating and satisfactory covering performance.
<
|
|
此文件为用户上传之共享文件,要查看此文档需要100点,
您不是会员或未登录,无点数提交,故不能查看全文。
如果您符合条件,请阅读以下规则:
- 你同意从你的帐户中扣除相应点数,转给本文作者或提交者;
- 本例文库所有版权属于原作者。如果本站或提交者侵犯了你的知识产权,请立即联络我们;
- 会员必须承诺仅个人使用所阅读内容,未经本站或原作者许可,不得以任何形式在网络上传播或复制有关内容。
- 如果你违反承诺,本站及原作者均有权予以追诉。
|
|
|