给水无二次污染用户终端安装组合
PP-R进水管 PP-R阀门 PP-R直焊型接头 塑料水表 PP-R直焊型接头 至用户管道
Secondary-pollution-free user-end water-supply assembly
PP-R inlet pipe, PP-R valve, PP-R directly solderable coupler, plastic meter, PP-R directly solderable coupler, to the pipe-line at the user′s premise.
安装优势
1、 优越的环保性,彻底解决自来水给水的二次污染问题,符合纯水供水条件。
2、 2、采用直焊型接管,降低安装费用,使安装快捷方便,减轻用户负担。(可省去二只PP-R铜内丝接头)
3、 超强的耐冻性,在相同环境下比传统金属安装组合更耐冻。
4、 正确安装后滴水不漏,自来水长期不用不影响表内、管内水质,节约水资源。
Advantages:
1. Environment-friendly. Offer a thorough solution to secondary pollution problem in the water supply system of running water to ensure compliance of clean water supply.
2. Come with directly solderable coupler to reduce the cost and facilitate the installation. (Two PP-R copper faucet couplers can be omitted)
3. Extra-strong resistance to freezing. Higher resistance than the metal assembly under the same condition.
4. Free of leakage as long as it′s properly assembled. The water inside the meter or pipes will not degrade for a long-term between uses, contributing to resource-saving purpose.
15mm塑料水表壳
15mm plastic meter housing
产品介绍
产品美观、耐冻、耐腐蚀、经济实用。材料采用进口ABS或PC塑料制成,全套制品通过高效复合抗氧剂、光稳定剂进行耐候改性,可在户外恶劣环境下长期使用。产品内外结构完全按照国际图纸制造,可与现有管网和机芯匹配。试验耐压大于1.6Mpa,工作水温0℃-40℃,工作压力大于1Mpa。使用本产品制成的水表,配合PP-R给水管道可解决自来水二次污染问题。
Product Overview
<
|