显示模式
Display Mode
触摸屏不仅时时显示出主轴负载、珩磨时间等机床状态而且使安装调试快捷方便。主轴负载显示出零件的高点与低点以便操作者调整冲程与珩磨时间。珩磨往复冲程采用具有智能闭环控,自动找出孔径最小处,能自动判断珩磨往复次数,以保证孔径一致性加工精度。
Touch screen not only shows the status of tools such as the load of main axle and the time of honing, but enables a quicker and easier installation and ommissioning as well. The main axle load tells us the high point and lower point of a part so as to facilitate the adjustment of stroke and honing time. The honing eciprocation stroking comes with intelligent closed-loop control unit to find the minimum bore diameter and determine the frequency of reciprocation of honing automatically, so as to ensure the consistency and precision of bore machining.
|